For steel investment castings with long shape or thin diameter, it's much better to place them well to avoid distortion defects. If steel investment castings with small section surface and big section surface are heating in same oven. The castings with small section should be placed at front of the oven. For complex steel investment castings, especially for those with hollow shapes, it's much better to preheat the castings, then, increase the temeperature slowly. This will help to avoid stress defects left in steel investment castings caused by quick heating process.
During normalizing treatment, the steel investment castings should be fixed in certain posistion. They can't be located randomly. A good position during normalizing can make areas of steel investment castings heat treated homogeneously.
If the required temperatures for steel investment castings with different materials are same, they can be heat treated in one oven.
After normalizing, the steel investment castings should be placed separately on dry ground. Heated castings can't be overlaped, or placed in moist ground. These will affect the cooling on different sections of the steel investment castings. The cooling rates on different sections will affect the hardness at those areas.
Generally, temperature of water can't higher than 40℃. Temperature of oil is less than 80℃.
Contact Person: Mr. Fred Zhang
Tel: 0086 574 28861663
Fax: 86-574-28861665
Auto Parts Stainless Steel Precision Casting , Trucks Lost Wax Metal Casting
Carbon Steel Investment Casting Components , Precision Metal Casting Pretend Cap For Coffee Machine
Rail Tools Investment Casting , High Precision Steel / Mild Steel Casting
Slider Investment Casting Parts , High Standard Stainless Steel Investment Casting
Custom Casting Services Modern Investment Casting , High Precision Casting Car Exhaust
Silicon Precision Steel Casting Car Parts
Silica Sol Precision Casting For Power Tooling , Stainless Steel Casting Process
High Standard Stainless Steel Precision Casting Silicon Casting Connecting Flange
High Precision Automobile Casting Components Surface Roughness Ra 3.2 ~ Ra 6.3
Automobile Casting Components Lost Wax Process For The Car Exhaust System
High Hardness Automobile Casting Components Car Transmission Gear Box Sleeve Alloy Steel
Silica Sol Investment Casting 0.3 - 1Kg , Pipe Fitting High Precision Casting